Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Single-stage centrifugal pumps of petrochemical design TCK with MAGNETIC DRIVE and CLOSED impeller type
to 280 l/h.
to 14 bar.
Technical documentationEnvironment:
Derivatives of
Standard: ISO 2858, ISO 5199.
Industry: chemical, petrochemical, pharmaceutical, food, pulp and paper, environmental, steel, textile, etc.
Impeller: radial closed type with cantilever installation.
Housing: spiral type with axial flange on suction and discharge at 90°.
Shaft seal: gland packing, single/double mechanical seal, special cartridge seal (ISO 3069/DIN 24960) when supplied in accordance with the requirements of the American Petroleum Institute (API).
Bearing support: outer bearing housing with oil-lubricated ball bearings with the possibility of cooling. Ensuring high reliability and minimal maintenance.
Material: cast iron, stainless steel, SAF, Hastelloy.
Option: heating/cooling chamber, cartridge seal, ATEX, MOSA version, etc.
Features: innovative design and high-quality components. Possibility of monoblock version. No product leakage into the atmosphere (only 2 static
gaskets). No need for expensive control systems and minimal maintenance costs. Magnetic coupling temperature control device and pump vibration.
High efficiency and reduced power consumption. Internal lubrication with the pumped liquid.
Possibility of retrofitting existing pumps equipped with traditional sealing systems (i.e.: double mechanical seal with tank flushing or other accessories).
Magnetic coupling in SmCo (samarium-cobalt). Internal bearing supports - sleeve with silicon carbide bearing.
Additional information: easy installation thanks to the reduced number of components and the modular design of the magnetic couplings. Monobloc installation of the pump part with the B5 electric motor ensures the best alignment and reduction of overall dimensions. Cooling or heating of the pump housing and magnetic coupling.