Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Hygienic rotary lobe pumps with various rotor types.
to 70 m³/h.
to 15 bar.
Technical documentationDONJOY is one of the leading Chinese manufacturers of high-quality, hygienically clean vane pumps.
Raw materials and technologies for the production of pumping equipment from DONJOY are certified according to ASME BPE, EHEDG, FDA and 3A standards. Welding technologies and surface treatment are carried out on ABB machines (USA).
The production of DONJOY cam pumps is guaranteed by a certified quality management system based on the ISO 9001 standard.
Due to their design, DONJOY cam pumps are widely used in the food, pharmaceutical, perfumery and cosmetic, chemical and many other industries.
Environment:
Standard: СЕ, FDA,3A, ASME BPE, EHEDG, ISO 9001.
Arrangement: TUL Series (horizontal), TUR Series (vertical).
Material: 304/316L, 1.431/1.4404, ASME BPE 316L, 1.4435 NB2 Fe ≤ 0,5%.
Surface treatment: ≤ Ra0.8 μm, ≤ Ra0.6 μm, ≤ Ra0.4 μm.
