Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
FTI SP series magnetic coupling pump.
to 48 m³/h.
to 38 m.w.s.
Technical documentationWarning: If a pump is bushing with a PTFE, ceramic or silicon carbide sleeve, it cannot run dry without causing damage to the pump. It is recommended to use dry-running protection. However, the pump can run dry if equipped with a carbon sleeve. The exact length of time a pump can run dry with a carbon sleeve depends on the operating and environmental conditions.
Construction:
- Corrosion-resistant polypropylene (82°C) or PVDF (104°C);
- Rare earth magnets;
- Cast S-shaped suction channel eliminates the need for a check valve;
- Easy external drive adjustment ensures optimal alignment and motor installation;
- cam O-rings and other options;
- Carbon, ceramic, Teflon, carborundum sleeves;
- NEMA or IEC motors;
- Threaded, sleeve and flange connections;
- Special "snail" design allows for fast suction.
Applications:
- Pumping and transportation from railcars, tank trucks, sumps, pits, temporary storage or underground tanks to processing or storage locations;
- Installation outside the storage area;
- Pipeline system with air plugs;
- When protection against complete pumping is required.
Typical pumped media:
- Sodium hydroxide and hypochlorite;
- Sulfuric, hydrochloric and nitric acids;
- Various alkalis;
- Corrosive mixtures, solvents, chemical wastewater.