Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Doseuro SR series diaphragm dosing pump type FM.
to 47 l/h.
to 10 bar.
Technical documentationThese pumps are used in the following cases:
- the liquid to be dosed contains a small amount of suspended solids;
- the liquid to be dosed is toxic;
- a drip-proof/tight design is required;
- high pressure is not required.
Each pump is equipped with a standard gearbox system and a vertically mounted B14 MEC profiled electric motor.
The motor power is typically 0.09 kW, 4 poles: 3 phases 230/400 50/60 Hz, 1 phase 230V/50 Hz or 110V/60 Hz.
As the motors meet the technical requirements of UNEL-MEC, there are many alternative options available, including different voltages, frequencies and insulation classes, while explosion-proof designs are not permitted.
The gearbox has standard endless screw and worm wheel, with bearings completely immersed in oil.
The stroke length adjustment mechanism is a positive direct stroke, spring return type, actuated by an eccentric; this forces the diaphragm forward (discharge phase) for the entire stroke length, while a spring in constant tension causes the diaphragm to return (suction phase).
Max. capacity: 14 (FM 050-30); 47 (FM 050-50).
Max. pressure: 10 (FM 050-30); 5 (FM 050-50).