Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Single-stage centrifugal pumps of TCT petrochemical design with a SEMI-OPEN VORTEX impeller.
to 250 l/h.
to 7 bar.
Technical documentationEnvironment:
Standard: ISO 2858 / DIN 24256, ISO 5199.
Industry: chemical, petrochemical, pharmaceutical, food, pulp and paper, environmental, steel, textile, etc.
Impeller: semi-open internal vortex (VORTEX) type with ceramic coating.
Housing: with ceramic coating.
Shaft sealing: gland packing, single/double mechanical seal, special cartridge (ISO 3069/UNI EN 12756) when supplied in accordance with the requirements of the American Petroleum Institute (API - American Petroleum Institute).
Bearing support: three sizes of innovative «Back pull-out» design. Ensuring high reliability and minimum maintenance.
Material: cast iron, stainless steel, SAF, Hastelloy.
Option: heating/cooling chamber and more.
Features: the liquid is treated by means of a vortex motion created by the impeller, which does not come into contact with the pumped liquid.
Design: the pump housing, casing cover and support frame of the CH series and derivative series are used. Thus, the high-performance characteristics are maintained with the additional bonus of reducing the number of spare parts to be stored.