Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Multistage SELF-PRIMING centrifugal pumps of petrochemical design TBA with OPEN impeller type "STAR" with low NPSH value
to 35 l/h.
to 40 bar.
Technical documentationEnvironment:
Derivatives of
Standard: UNI EN 12756 / DIN 24960.
Industry: chemical, petrochemical, pharmaceutical, food, pulp and paper, environmental, steel, textile industries, etc.
Use: for draining condensate and distilled liquids, in boiler feed systems, for removing liquids from processes under vacuum, at filling stations, as well as in fire extinguishing systems and autoclaves, in drinking water supply systems and hygiene systems on ships, in jet washing installations.
Suction and filling height: to 8.5 m (over water).
Impellers: open type "star" individually hydraulically balanced.
Materials: cast iron, stainless steel, SAF, Hastelloy.
Sealing: mechanical standard and unified according to UNI EN 12756. Additional double mechanical "back to back" or "tandem" Seal housings with cooling or heating are available.
Special applications: For the transport of corrosive, toxic, polluting and malodorous liquids and in all cases where there should be no leakage to the outside, the TBAK version with magnetic drive, derived from TBA, is also available.
Additional information: These pumps are derived from the TBH series with an additional centrifugal stage on the suction side and have the same performance, design and operating characteristics as the TBH series.
The TBA pumps have extremely low NPSH requirements and are particularly suitable for pumping boiling liquids for handling liquids with entrained gases and liquefied gases such as LPG, for difficult applications.
Pump components are interchangeable, reducing the need for spare parts for both series.