Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
FTI magnetic clutch pump VKC series.
to 13 m³/h.
to 20 m.w.s.
Technical documentationPlastic vertical and horizontal centrifugal hermetic chemical pumps with magnetic coupling of the MSKC series from FINISH THOMPSON INC (USA), designed for pumping aggressive chemically active liquids without solid inclusions under high pressure at low flow rates. Such pumps are also called high-pressure pumps. The operating temperature for pumps made of corrosion-resistant polypropylene is to +82°C, for pumps made of PVDF to +104°C. in horizontal version. The pumps are ideally suited for pumping liquids such as: sodium hydroxide and hypochlorite, sulfuric acid, hydrochloric acid, nitric acid, alkalis, various corrosive mixtures, solvents, wastewater with chemical impurities, etc.
Construction:
- Corrosion-resistant polypropylene (+82°C) or PVDF (+104°C) in horizontal; max. temperature vertical +60°C.;
- Multi-stage design reduces footprint;
- MSKC series unique shaft transmits torque to the first stage impeller;
- MSKC – independent thrust bearings on each stage for maximum reliability;
- Rubber O-rings; carbon, ceramic or Teflon bushings;
- NEMA 56C or IEC standard motors;
- VKC – modular design, varying from 30 cm. to 152 cm.
Applications:
- Processing, spraying, unloading and transporting liquids under high pressure at low flow rates;
- Filtration/circulation of coatings, etching/washing of printed circuit boards;
- Water and gas treatment plants;
- Laboratories, pharmaceuticals, photo printing.
Typical pumped media:
- Sodium hydroxide and hypochlorite;
- Sulfuric, hydrochloric and nitric acids;
- Various alkalis;
- Corrosive mixtures, solvents, wastewater with chemical impurities.