Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Doseuro SR series diaphragm dosing pump type B&BR.
to 1067 l/h.
to 60 bar.
Technical documentationThese pumps are used when:
- the liquid being dosed contains a small amount of suspended solids;
- the liquid being dosed is toxic;
- a drip-proof/tight design is required.
Each pump is equipped with a standard gearbox system and a vertically positioned B14 electric motor profiled in accordance with the specifications.
The motor power range is from 0.18 kW to 0.75 kW in accordance with the European standard: 3 phases 230/400 V 50/60 Hz, 4 poles and 1 phase 230/50-60 Hz or 110/60 Hz.
As the motors meet the technical requirements of UNEL-MEC, there are many alternative options available, including different voltages, insulation classes and special explosion-proof designs.
The gearbox has a standard endless screw and worm wheel, with bearings completely immersed in oil.
The stroke length change mechanism is a positive direct stroke, spring return type, which is driven by an eccentric.
Max. capacity: 108 (B 125 N); 418 (B 175 N); 1068 (B 250 N); 108 (BR 125 N); 418 (BR 175 N); 1068 (BR 250 N).
Max. pressure: 60 (B 125 N); 60 (B 175 N); 23.8 (B 250 N); 40 (BR 125 N); 40 (BR 175 N); 20.7 (BR 250 N).