Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
TWO-STAGE liquid ring vacuum pumps for DEEP vacuum, TRH series
to 3500 m³/h.
900 - 33 mbar.
Technical documentationEnvironment: clean air, gases, dry and wet (saturated) vapors.
Application: moisture evaporation, deaeration, distillation, vacuum filtration, sublimation and other drying systems, rectification, purification, degassing, solvent removal, etc.
Industry: food, pharmaceutical, perfumery and cosmetic, chemical, metallurgical, construction, machine building, woodworking, pulp and paper industry, etc.,
Standard: ISO 9001, DIN 24960
Material: standard - cast iron or stainless steel, optional - Ni-Resist D2B, Hastelloy B or C (high temperature alloy), UranusB 6 (duplex alloy).
Impellers: 2 pcs, bronze, steel, stainless steel 304/316
Shaft seal: gland packing, single, double mechanical ("tandem" or "back to back") or mechanical return type.
Features: to increase the rigidity and strength of the pumps, facilitate assembly and maintenance, the pumps are manufactured with fewer components than normally required. The shaft length has been reduced, thus eliminating the potential risk of shaft deflection and vibration of mechanical seals.
Additional information: on the basis of these pumps are madevacuum systems, which consist of a liquid ring vacuum pump, a water separator, a high temperature heat exchanger and fittings. All components of the vacuum system are mounted on a common frame.