Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Eccentric auger pumps from JOHSTADT in hygienic and special versions
to 500 m³/h.
to 24 bar
Technical documentationCompany JOHSTADT is one of the leading German manufacturers of high-quality eccentric auger pumps and other equipment. Auger pumps are widely used in the pulp and paper, processing, food, construction, cosmetics, chemical, agricultural and many other industries.
The use of the most modern computer-aided design systems and numerically controlled equipment ensure high quality, reliability and performance of JOHSTADT pumps.
JOHSTADT pumping equipment meets the highest requirements of international and national markets thanks to continuous improvement and ISO 9001/ATEX standards.
Standard:
Standard:CE, FDA, 3A, DIN 11851, ISO 9001, ATEX.
Material:cast iron, stainless steel 304/316L.
Additional information: self-priming to 6 m, reverse, wide choice of elastomer and rotor materials, quick and easy dismantling using locking rods.
Various technical solutions are possible: heated housing, bottom drain hole, safety or regulating bypass channel, special sizes, etc.
