Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Single-stage centrifugal pumps of TCN petrochemical design with a CLOSED impeller with an "Extended Inductor" profile.
to 2000 l/h.
to 6 bar.
Technical documentationEnvironment:
Standard: ISO 2858 / DIN 24256.
Industry: chemical, petrochemical, pharmaceutical, food, pulp and paper, environmental, steel, textile industries, etc.
Impeller: open type.
Housing: spiral type with axial flange on suction and discharge at 90°.
Shaft seal: gland packing, single/double mechanical seal, special cartridge seal (ISO 3069/DIN 24960) when supplied in accordance with the requirements of the American Petroleum Institute (API).
Bearing support: reinforced design for severe operating conditions. Ensuring high reliability and minimal maintenance.
Materials: cast iron, stainless steel, SAF, Hastelloy.
Options: heating/cooling chamber, cartridge seal, ATEX, MOSA version and more.
Features: Advanced Inducer suction profile and extremely low and stable NPSH across the entire operating range in any application.