Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
FTI DB series magnetic coupling pump.
to 43 m³/h.
to 45 m.w.s.
Technical documentationWarning: If a pump uses bushing a PTFE, ceramic or silicon carbide sleeve, it cannot run dry without causing damage to the pump. It is recommended to use dry-running protection. However, the pump can run dry if equipped bushing from carbon. The exact length of time a pump can run dry with a bushing carbon depends on the operating conditions and the environment.
Construction:
- Corrosion resistant polypropylene (82°C) or PVDF (104°C);
- Rare earth magnets;
- cam O-rings and other options;
- Carbon, ceramic, Teflon, carborundum (not used for DB3, 4, 5);
- TEFC, Chem Duty, EXP and 575V NEMA or IEC motors;
- ISO 1940 G2.5 balancing (except DB3, 4, 5);
- Threaded, socketed and flanged connections;
- Threaded connections only for DB3, 4, 5.
Applications:
- Processing, transportation and unloading of chemicals;
- Filtration/circulation of coatings, etching/washing of printed circuit boards;
- Water and gas treatment plants;
- Laboratories, pharmaceuticals, photo printing.
Typical pumped media:
- Sodium hydroxide and hypochlorite;
- Sulfuric, hydrochloric and nitric acids;
- Various alkalis;
- Corrosive mixtures, solvents, wastewater.