Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Multistage SELF-PRIMING centrifugal pumps of petrochemical design TVAK with MAGNETIC DRIVE and OPEN impeller of the "STAR" type with low NPSH value
to 35 l/h.
to 35 bar.
Technical documentationEnvironment:
Derivatives of
Standard: UNI EN 12756 / DIN 24960.
Industry: chemical, petrochemical, pharmaceutical, food, pulp and paper, environmental, steel, textile industries, etc.
Application: for pumping liquids close to boiling point, transporting liquids containing gases, in particular liquefied gases, for draining condensate and distilled liquids, in boiler feed systems, for removing liquids from vacuum processes, at filling stations, as well as in fire extinguishing systems and autoclaves, in drinking water supply systems and hygiene systems on ships, in jet washing installations. in harsh conditions.
Suction and filling height: to 8.5 m (on water).
Impellers: open type "star" individually hydraulically balanced.
Materials: cast iron, stainless steel, SAF, Hastelloy.
Seals: mechanical standard and unified according to UNI EN 12756. Optional double mechanical "back to back" or "tandem". Seal housings with cooling or heating are available.
Special designs: Pumps of this series can be monobloc. Monobloc mounting to the B5 electric motor for best alignment and reduction of overall dimensions. Cooling or heating of the magnetic coupling. Outer bearing housing with oil-lubricated ball bearings with the possibility of cooling.
Additional information: TVAK is obtained from TBA. These pumps achieve a very low NPSH value, which makes them particularly suitable for pumping liquids close to the boiling point and in harsh conditions. The specific design ensures the transport of liquids containing gases, in particular liquefied gases. All other performance, design and use characteristics of the TBH series are retained in this series of pumps, thus also guaranteeing high modularity and interchangeability.