Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Multistage SELF-PRIMING centrifugal pumps of petrochemical design TVK with MAGNETIC DRIVE and OPEN impeller of the "STAR" type
to 35 l/h.
to 25 bar.
Technical documentationEnvironment:
Derivatives of
Standard: UNI EN 12756 / DIN 24960.
Industry: chemical, petrochemical, pharmaceutical, food, pulp and paper, environmental, steel, textile industries, etc.
Using: for the removal of condensate and distilled liquids, in boiler feed systems, for the removal of liquids from vacuum processes, at filling stations, as well as in fire extinguishing systems and autoclaves, in drinking water supply systems and hygiene systems on ships, in jet washing installations.
Suction and filling height: to 8.5 m (on water).
Impellers: open star type individually hydraulically balanced.
Material: cast iron, stainless steel, SAF, Hastelloy.
Seals: mechanical standard and unified according to UNI EN 12756. Additional double mechanical "back to back" or "tandem". Cooled or heated seal housings are available.
Special designs: Pumps of this series can be monobloc. Monobloc mounting to the B5 electric motor for the best alignment and reduction of overall dimensions. Cooling or heating of the magnetic coupling. Outer bearing housing with oil-lubricated ball bearings with the possibility of cooling.
Special application: For transporting liquids in cases where there should be no leakage of "hazardous" liquid into the atmosphere.
ДAdditional information: TVK is derived from TBH. Thanks to the innovative design of the TVH series pumps, the number of components has been reduced, the vibration and noise levels have been reduced. As a result, the pump has maximum reliability and durability. Due to the individual balancing of the impellers, axial loads on the bearings have been eliminated. Low operating speed for a long service life. No need for expensive control systems and minimal maintenance costs. Magnetic coupling temperature control and pump vibration monitoring. Easy installation thanks to the reduced number of components and the modular design of the magnetic couplings. Internal lubrication with the pumped liquid. Magnetic coupling in SmCo (samarium - cobalt). Internal bearing supports - sleeve with silicon carbide bearing.