Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Monoblock SINGLE-STAGE liquid ring vacuum pumps for LOW, MEDIUM and HIGH vacuum of the TRM series
to 300 m³/h.
900 - 33 mbar.
Technical documentationEnvironment: clean or dusty air, gases, dry and wet (saturated) vapors.
Application: aspiration, moisture evaporation, deaeration, distillation, vacuum filtration, sublimation, drying, rectification, purification, degassing, solvent removal, etc.
Industry: food, pharmaceutical, perfumery and cosmetic, chemical, metallurgical, construction, machine-building, woodworking, pulp and paper industry, etc.,
Standard: ISO 9001/ DIN 24960
Material: wear-resistant cast iron or high-quality stainless steel
Working wheels: 1 pc., bronze/brass or stainless steel 304/316
Shaft seal: gland packing, single, double mechanical (tandem or back-to-back) or mechanical turnable type.
Features: stainless steel port plate with laser-cut port profiles. This solution makes the port plate wear-free and the laser-cut ports guarantee the best-performing profiles.
Additional information: the TRMX series is the transfer of all the basic concepts of the TRVX series to the production of monobloc pumps. The result is an economical pump with exceptional performance and reliability. The innovative anti-cavitation system also comes from the TRVX series. The injection port is located very close to the suction port, improving the highest operating vacuum level and ensuring higher efficiency throughout the pump's vacuum range. Thanks to this solution, the pump's operating costs are significantly reduced.