Contacts
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Vertical pump for abrasive and aggressive acidic media.
to 100 l/h.
to 60 bar.
Applications:
- Mining and enrichment of metals and minerals;
- Stone processing;
- Ceramics;
- Chemical processes;
- Steel mills;
- Thermal power plants;
- Drilling fluids.
Environments:
- Highly abrasive liquids;
- Highly acidic liquids;
- Highly acidic liquids containing abrasive suspensions;
- Liquids containing petroleum products;
- Chemical solutions of salts;
- Drilling fluids;
- Solutions and suspensions of increased viscosity;
- Water containing impurities.
Impeller:
The impeller for vertical pumps can be made of the following materials:
- Metal;
- Hardalloy alloy;
- Metal with rubber lining;
- Polypropylene, fluoroplastic;
The number of blades (vanes) depends on the pump model, its size and the characteristics of the pumped liquid.
Seal type:
- Rubberized removable
Features:
- Low maintenance costs;
- Pump-motor connection: V-belts or flexible coaxial connection (coupling);
- There is a bush-sleeve guide sealing system, it also works as a kind of additional lower bearing. The seal is made of anti-abrasive material (rubber, polyurethane, Hardalloy PEMO);
- The bush-sleeve lubrication system is made on the principle of pumping the liquid itself, in a small amount (maximum to 5%);
- All bearings are lubricated with grease.