Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Gear (rotor) pump manufactured by Pompe Cucchi
to 40 000 m³/h.
to 15 bar
Technical documentationFIELDS OF APPLICATION:
Gear pumps of the N series are used in the production of acids, alkalis, petroleum products, oils, gasoline, household chemicals, liquid phosphorus fertilizers, juices, shampoos, cosmetics, isocyanate glue.
GENERAL DESCRIPTION
Essentially, the pump consists of two drive gears that engage each other inside a cast main body, thus creating fluid flow between inlet and outlet
WEARING MATERIALS
Normal wearing parts are included as spare parts in the 2-year warranty:
| Spare parts list | ||
| ITEM | QUANTITY | DESCRIPTION |
| 1 | 1 | Sealing cover |
| 2 | 1 | Sealing cover |
| 3 | 1 | Central part |
| 4 | 1 | Back cover |
| 5 | 1 | Drive shaft |
| 6 | 1 | Driven shaft |
| 7 | 1 | Drive gear |
| 8 | 1 | Driven gear |
| 9 | 4 | Insert |
| 10 | 1 | Rotary ring (mechanical seal) |
| 11 | 1 | Centering ring |
| 13 | 1 | Internal retaining ring |
| 14 | 1 | Ball bearing |
| 15 | 8 | Head screw |
| 16 | 3 | Head screw |
| 17 | 4 | Dowel pin |
| 18 | 2 | S.A.E. flange (welded) |
| 19 | 8 | Head screw |
| 1A | 1 | Flange sealing cover |
| 20 | 1 | Foot |
| 21 | 2 | Head screw |
| 22 | 2 | Feather key |
| 23 | 1 | Feather key |
| 24 | 2 | Gasket |
| 25 | 1 | External retaining ring |
| 26 | 1 | Sealing ring |
| 27 | 4 | Head screw |
| 30 | 1 | The bell |
| 3A | 1 | Body with a heating jacket |
| 9A | 4 | Self-lubricating sleeve |
| 10A | 1 | Stationary ring (mechanical seal) |
| 16A | 6 | Head screw |
| 16B | 4 | Head screw |
| 18A | 2 | Sealing ring |
| 25A | 1 | Retaining ring |