Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Eccentric auger (screw) pump from the manufacturer ISMAKSAN.
up to 500 m³/h.
up to 72 bar.
Technical documentationEngineering firm İŞMAKSAN is one of the leading Turkish manufacturers of high-quality positive displacement pumps specializing in the transportation of thick, viscous, high-temperature, aggressive and abrasive liquids and media.
İŞMAKSAN Auger (screw) pumps find solutions for various fluid combinations and various application areas such as food and beverage production, environmental technologies, textile, paint and varnish, pulp and paper, petrochemical, soap, biochemical, agricultural and many other industries.
Pumping equipment İŞMAKSAN meets quality standards ISO 9001-2000.
Environment:
Standard: ISO 9001-2000.
Sealing: gland packing, mechanical single/double and special.
Material: cast iron, stainless steel 304/316.
Location: horizontal, vertical.
Type: monoblock, cantilever, barrel.
Additional information: self-priming to 6 m, reverse, wide selection of elastomer and rotor materials, quick and easy dismantling using locking rods.
Various technical solutions are possible: heated housing, bottom drain hole, loading hopper, safety or regulating bypass channel, special dimensions, follower plate for barrel pump, etc.
