Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
SINGLE-STAGE liquid ring vacuum pumps of the "KING SIZE" type for LOW, MEDIUM and HIGH vacuum of the TRVK-TRSK series
to 30,000 m³/h.
from 40 to 200 mbar
from 200 to 900 mbar
Technical documentationEnvironment: or dusty air, gases, dry and wet (saturated) vapors.
Usage: aspiration, moisture evaporation, deaeration, distillation, vacuum filtration, sublimation, drying, rectification, purification, degassing, solvent removal, etc.
Industry: food, pharmaceutical, perfumery and cosmetic, chemical, metallurgical, construction, machine building, woodworking, pulp and paper industry, etc.,
Standard: ISO 9001/ DIN 24960
Material: wear-resistant cast iron with some carbon steel components. Other construction materials on request.
Impellers: 1 pc., stainless steel 316; other construction materials on request.
Shaft seal: gland packing, single, double mechanical (tandem or back-to-back) or mechanical cartridge type.
Features: The TRVK series is designed for optimum efficiency in the operating range from 40 to 200 mbar thanks to a special variable discharge port. The TRSK series works best in the range from 200 to 900 mbar. Both series outperform competitive pumps designed with cones and radial gas inlet.
Additional information: single-stage TRVK-TRSK liquid ring pump series, offering optimum performance and reliability. Minimal water consumption, low operating speeds, extended bearing support and innovative impeller design ensure extremely quiet and economical operation, extending service life. The versatile design makes the pump easy to install. Various piping solutions are available.