Contacts
Technical documentation
+38(050)353-23-39
+38(044)502-23-38
+38(050)353-23-39
+38(044)502-23-38
Pumping of abrasive media, oils, petroleum products and liquids To 350°C.
To 2 000 m³/h.
To 40 bar
Pumping out air, saturated aggressive vapors, creating a vacuum To 33 mBar.
To 30 000 m³/h.
To 33 mbar.
Pumping air, saturated aggressive vapors, creating a vacuum To 5 mBar.
To 3 500 m³/h.
To 5 mbar
Pumping of liquids with different degrees of viscosity To 80,000 Cps To 250°C.
To 250 m³/h.
To 16 bar
Pumping of food products, wine and cosmetics industry.
To 200 m³/h.
To 16 bar
Pumping of foods with high viscosity and solid particles content.
To 20 m³/h.
To 12 bar
Pumping of aggressive chemicals, acids, alkalis and explosive liquids.
To 55 m³/h.
To 34 m H2O
Designed for stationary installation with direct immersion in the tank.
To 55 m³/h.
To 34 bar
Pumping liquids with different degrees of viscosity (glues, molasses, ointments, resins).
To 900 m³/h.
To 70 bar
Meat and dairy products, bakery products, pharmaceutical and chemical products.
To 70 m³/h.
To 15 bar
Accuracy better than 1% from 10 to 100% of maximum performance.
To 4028 m³/h.
To 80 bar
Highly viscous fluids that may contain high concentrations of solids/abrasives or other substances.
To 500 m³/h.
To 24 bar
Motor pump LIB/1-3 P43/AL-NBR/Hatz 1B20+T with diesel engine.
up to 19.2 m³/h.
10 m.w.st.
Technical documentationbasic capabilities
The HATZ motor-pump diesel-powered diaphragm is indispensable for pumping thick, viscous, heavily contaminated liquids. The diaphragm pump is made of wear-resistant NBR material.
Parts in contact with the pumped liquid can be made of various materials: aluminum, cast iron, stainless steel AISI 304 or 316, Rilsan with plastic coating, fluorinated resins. Parts not in contact with the pumped liquid: aluminum. Diaphragms and valves made of: neoprene, Dutral, hypalon, Viton, nitrile rubber, non-toxic gum, non-toxic silicone.